Camshafts

S&S MR103C chain drive camshaft set for 2006 HD Dyna® and 2007-2016 HD big twins are recommended for modifed engines with larger displacement and higher compression. More torque and horsepower than...

The 509 Touring Cam is designed as a bolt-in, high torque cam for 1999-'06 models, except 2006 HD® Dyna®. 180 psi cranking compression, no need for compression releases. For 88 CID engines with stock...

583 cams are bolt-in cams for 2005-'16 engines. Cams that exceed the limits of the stock valve springs require the use of special high lift springs. Most S&S cams have higher lift than stock and are...

Designed as a bolt-in cam for 88, 95, and 96 CID engines with compression ratios below 9.7:1, it is primarily intended for use with stock, un-ported heads. 3000-5500 rpm. The 510C chain drive...

The .551 inch lift cam is designed for engines with 96 to 106 CID and 9:1 to 10:1 compression this is a bolt-in cam set designed for stock or mildly modified touring bikes. Greatly improves low-end...

The 585 cam is designed for 88 to 95 inch engines with compression ratios from 10 to 10.5:1 and 100 and 107 inch engines at 9.7:1 to 10.5:1 compression. Many riders are leery of the stock chain cam...

The 570 cam is designed for 88 to 96 inch engines with compression ratios between 9:1 and 10:1. Many riders are leery of the stock chain cam drive in late model big twins. While it is true that the...

Tuner Series Stage 4 Camshaft; Fits w/D VTEC Engines; Intake Dur./Lift 254 Deg./0.476in.; Exhaust Dur./Lift 254 Deg./0.460 in.;This Part Fits:YearMakeModelSubmodel1988-1991HondaCivicBase

This camshaft is designed and dyno-proven in the USA, ensuring top-tier performance and reliability. Utilizing state-of-the-art valvetrain software in its engineering process, this product delivers...

HKS RB26 STEP 1 264 IN (N)

This camshaft is designed and dyno-proven in the USA, ensuring top-tier performance and reliability. Utilizing state-of-the-art valvetrain software in its engineering process, this product delivers...

The 540C cam was designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6000 rpm.This Part Fits:YearMakeModelSubmodel2018-2020Harley-DavidsonFLDE Del