Mishimoto 17-19 GM 6.6L L5P Intercooler Pipe and Boot Kit Polished MMICP-DMAX-17KP

Part Number: misMMICP-DMAX-17KP Description: Mishimoto 17-19 GM 6.6L L5P Intercooler Pipe and Boot Kit Polished TechSpec Applications: 2017-2019 Chevrolet Silverado 2500 HD w/ 6.6L Duramax L5P--2017-2019 Chevrolet Silverado 3500 HD w/ 6.6L Duramax L5P----2017-2019 GMC Sierra 2500 HD w/ 6.6L Duramax L5P--2017-2019 GMC Sierra 3500 HD w/ 6.6L Duramax L5P TechSpec Engine Codes: N/A TechSpec Chassis Codes: N/A TechSpec Maximum Recommended Boost Pressure (PSI): N/A TechSpec Maximum Recommended Horsepower: N/A TechSpec Overall Length (in): N/A TechSpec Overall Height (in): N/A TechSpec Overall Width (in): N/A TechSpec Core Type: N/A TechSpec Core Thickness (in): N/A TechSpec Core Length (in): 22 TechSpec Core Height (in): 6 TechSpec Inlet (in): N/A TechSpec Outlet (in): N/A TechSpec Weight (lbs): N/A TechSpec Note: N/A TechSpec Includes: (3) Aluminum Intercooler Pipes--(1) Aluminum Intercooler Pipe w/ O-Ring and Spring Clip--(5) Silicone Boots with DuraCore Technology--(10) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). TechSpec Pipe Shape: N/A TechSpec Pipe Diameter: N/A TechSpec Pipe Length: N/A TechSpec Centerline Radius: N/A SellingPoint10: Additional bungs can be drilled and tapped for sensors SellingPoint11: Requires no additional tuning SellingPoint12: Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps SellingPoint13: Available in polished or wrinkle-black powder coated finish SellingPoint14: N/A SellingPoint15: N/A SellingPoint01: Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P SellingPoint02: 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends SellingPoint03: Up to 55-percent less restrictive than stock piping SellingPoint04: Includes new quick-disconnect O-ring and spring clip SellingPoint05: Hot-side eliminates stock resonator for maximum flow SellingPoint06: Eliminates failure-prone stock throttle valve connector SellingPoint07: Retains temp sensor harness mount for safe and secure wire routing SellingPoint08: Internal bead roll ensures secure connection between coupler and throttle valve SellingPoint09: CNC-machined quick-disconnect ensures precise, leak-free fit Install Difficulty: 3 OptionLabel: Polished