Mishimoto 15 Subaru WRX CVT Transmission Cooler Kit MMTC-WRX-15

Part Number: misMMTC-WRX-15 Description: Subaru WRX CVT Transmission Cooler Alternate Part Number: MMTC-WRX-15 Color: Silver Finish: Painted Material: Aluminum Installation Difficulty: 3/5 TechSpec Rows: 19 TechSpec Core Construction: N/A TechSpec Core Length (in): 11 TechSpec Core Height (in): 5.43 TechSpec Core Thickness (in): 1.97 TechSpec Engine Codes: FA20DIT TechSpec Chassis Codes: VA TechSpec Installation Notes: 22 in-lbs recommended for all worm-gear clamps.--These clamps have an operating range of 18-27 in- 2-3NM.--Do not exceed the maximum torque rating of 27 in-lbs----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb TechSpec Caution: It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. TechSpec Overall Height (in): N/A TechSpec Overall Length (in): N/A TechSpec Overall Width (in): N/A TechSpec Inlet: N/A TechSpec Outlet: N/A TechSpec Includes: Application-Specific Mounting Brackets--19-Row Oil Cooler--6-ft Rubber Transmission Hose, 3/8-in I.D.--45 -10AN to 3/8-in Barbed Push-On Fittings--Worm-Gear Clamps--Mounting Hardware Set--Mishimoto Lifetime Warranty TechSpec Applications: 2015-2021 Subaru WRX TechSpec Fluid Capacity (qts): N/A TechSpec Note: This will add approximately 1 qt. of CVT transmission fluid. The transmission fluid is called ñHT CVT Fluid" and it can be purchased at any Subaru dealer.--Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb SellingPoint10: N/A SellingPoint11: N/A SellingPoint12: N/A SellingPoint13: N/A SellingPoint14: N/A SellingPoint15: N/A SellingPoint01: 20 F (6.7 C) temperature decrease compared to using only the stock transmission cooler SellingPoint02: Direct fit with no cutting or modification to the vehicle SellingPoint03: 19-row stacked-plate oil cooler is front mounted for maximum airflow SellingPoint04: Mounting brackets include provisions for aftermarket horns SellingPoint05: Works in conjunction with the stock transmission cooler SellingPoint06: Works with the Mishimoto engine oil cooler kit SellingPoint07: Cooler available in Sleek Silver or Stealth Black SellingPoint08: Adds approximately 1 qt of transmission fluid SellingPoint09: Mishimoto Lifetime Warranty Install Difficulty: 3 OptionLabel: Silver