Mishimoto 13+ Dodge Cummins 6.7L Intercooler Kit - Silver MMINT-RAM-13KSL

Part Number: misMMINT-RAM-13KSL Description: Dodge 6.7L Cummins Intercooler Kit, 2013+ Alternate Part Number: MINTRAM13KSL Color: Sleek Silver Installation Difficulty: 4 Color: Silver TechSpec Applications: 2013-2018 Dodge Ram 6.7L Cummins TechSpec Engine Codes: N/A TechSpec Chassis Codes: N/A TechSpec Maximum Recommended Boost Pressure (PSI): N/A TechSpec Maximum Recommended Horsepower: N/A TechSpec Overall Length (in): 33 TechSpec Overall Height (in): 12.5 TechSpec Overall Width (in): 10 TechSpec Core Type: N/A TechSpec Core Thickness (in): N/A TechSpec Core Length (in): 25.7 TechSpec Core Height (in): 12.5 TechSpec Inlet (in): 3 TechSpec Outlet (in): 3 TechSpec Weight (lbs): N/A TechSpec Note: Vehicles with snowplow mounts installed may require trimming of the mounts to fit this intercooler. TechSpec Includes: (1) Mishimoto Intercooler--(3) Front Air Diversion Panels--(1) Replacement Lower Fan Shroud--(2) Mounting Brackets w/ Rubber Isolators--(2) Aluminum Pipes--(4) Silicone Boots with Duracore Technology--(8) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). TechSpec Pipe Shape: N/A TechSpec Pipe Diameter: N/A TechSpec Pipe Length: N/A TechSpec Centerline Radius: N/A SellingPoint10: Internal fins designed for maximum heat transfer with minimal pressure drop SellingPoint11: Includes Mishimoto Silicone Boots with DuraCore technology and Mishimoto Constant-Tension T-bolt Clamps SellingPoint12: Sleek Silver or Stealth Black intercooler options available SellingPoint13: Mishimoto Lifetime Warranty SellingPoint14: N/A SellingPoint15: N/A SellingPoint01: Direct fit for the 2013-2018 6.7L Cummins SellingPoint02: Includes hot-side and cold-side intercooler pipes and boots SellingPoint03: Lowers AITs by 12.5-percent SellingPoint04: 3-in mandrel-bent polished aluminum piping SellingPoint05: Bar-and-plate construction with cast aluminum end tanks SellingPoint06: 76.65-percent increase in external fin surface area SellingPoint07: 37.8-percent larger core volume than factory SellingPoint08: Includes new air ducts to divert air into the core and new lower fan shroud section SellingPoint09: End tanks strategically designed for optimal airflow Install Difficulty: 4 OptionLabel: Sleek Silver