Mishimoto 10-12 Dodge 6.7L Cummins Intercooler Kit (Black) MMINT-RAM-10KBK

Part Number: misMMINT-RAM-10KBK Description: Dodge 6.7L Cummins Intercooler Kit Alternate Part Number: MINTRAM10KBK Color: Black Finish: Brushed Material: Aluminum Installation Difficulty: 4/5 TechSpec Applications: 2010-2012 Dodge Ram 2500 w/ 6.7L Cummins Engine--2010-2012 Dodge Ram 3500 w/ 6.7L Cummins Engine--2010-2012 Dodge Chassis Cab w/ 6.7L Cummins Engine TechSpec Engine Codes: N/A TechSpec Chassis Codes: N/A TechSpec Maximum Recommended Boost Pressure (PSI): N/A TechSpec Maximum Recommended Horsepower: N/A TechSpec Overall Length (in): 38.75 TechSpec Overall Height (in): 28.75 TechSpec Overall Width (in): 11 TechSpec Core Type: Bar-and-Plate TechSpec Core Thickness (in): 3.15 TechSpec Core Length (in): 26.3 TechSpec Core Height (in): 26.7 TechSpec Inlet (in): 3.5 TechSpec Outlet (in): 3.5 TechSpec Weight (lbs): N/A TechSpec Note: Disconnecting the AC lines is necessary to remove the stock intercooler. It is recommended that the vehicle is taken to a certified AC repair shop to have the AC refrigerant properly evacuated before removing any stock intercooler components.----Relocation of the power steering cooler may be needed for H.O. (High Output) models. TechSpec Includes: (1) Mishimoto Intercooler--(1) Air Diversion Panel--(4) Silicone Boots with Duracore Technology--(8) Constant-Tension T-Bolt Clamps--(2) Aluminum Pipes--(2) Aluminum Mishimoto M Logo Badges--Mishimoto Lifetime Warranty TechSpec Installation Notes: N/A TechSpec Pipe Shape: N/A TechSpec Pipe Diameter: N/A TechSpec Pipe Length: N/A TechSpec Centerline Radius: N/A SellingPoint10: Includes Mishimoto Silicone Boots with DuraCore technology and Mishimoto Constant Tension T-bolt Clamps SellingPoint11: Sleek Silver or Stealth Black intercooler options available SellingPoint12: Mishimoto Lifetime Warranty SellingPoint13: N/A SellingPoint14: N/A SellingPoint15: N/A SellingPoint09: Mandrel-bent polished aluminum pipe eliminates restrictive bends SellingPoint01: Direct fit, mounts in the stock location SellingPoint02: Bar-and-plate construction with cast aluminum end tanks SellingPoint03: 52-percent greater internal volume than stock SellingPoint04: 3-in core is 100-percent thicker than stock SellingPoint05: End tanks strategically designed for optimal airflow SellingPoint06: Internal fins designed for maximum heat transfer with minimal pressure drop SellingPoint07: Aluminum intercooler pipes replace weak factory plastic cold-side pipe and small diameter hot-side pipe SellingPoint08: Provides improved airflow and lowers intake air temperatures Install Difficulty: 4 OptionLabel: Black