Camshafts

12-15 hp gains with Skunk2's Tuner Series Drop In Camshafts, our professional line of high-lift, racing camshafts for Honda's K-series VTEC engines. Tuner Series Drop In Camshafts are designed to optimize mid-range and top-end horsepower and torque, with...

Tuner Series Stage 4 Camshaft; Fits w/D VTEC Engines; Intake Dur./Lift 254 Deg./0.476in.; Exhaust Dur./Lift 254 Deg./0.460 in.;This Part...

The 540C cam was designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6000 rpm.This Part Fits:YearMakeModelSubmodel2018-2020Harley-DavidsonFLDE Deluxe 107Base2018-2021Harley-DavidsonFLFBS Fat Boy...

Type: 475C Rear; Timing Open: Intake 2.2º/Exhaust 52.2º; Timing Closed: Intake 31.2º/Exhaust 20.2º; Duration at 0.053: Intake 213.5º/Exhaust 252.5º; Valve Lift : Intake 0.475"/Exhaust 0.475"; Lift at TDC: Intake 0.093"/Exhaust 0.170"This Part...

Type: 465C Rear; Timing Open: Intake 2.8 degree/Exhaust 33.1 degree; Timing Closed: Intake 14.4 degree/Exhaust 5.8 degree; Duration at 0.053: Intake 197.2 degree/Exhaust 218.9 degree; Valve Lift : Intake 0.462"/Exhaust 0.462"; Lift at TDC: Intake 0...

The 509 Touring Cam is designed as a bolt-in, high torque cam for 1999-'06 models, except 2006 HD® Dyna®. 180 psi cranking compression, no need for compression releases. For 88 CID engines with stock compression ratio. Idle-4500 rpm. S&S 551 cams for...

583 cams are bolt-in cams for 2005-'16 engines. Cams that exceed the limits of the stock valve springs require the use of special high lift springs. Most S&S cams have higher lift than stock and are designed to take advantage of the extra flow of ported...

Designed as a bolt-in cam for 88, 95, and 96 CID engines with compression ratios below 9.7:1, it is primarily intended for use with stock, un-ported heads. 3000-5500 rpm. The 510C chain drive camshafts for 1999-'06 use the stock Harley-Davidson® chain...

A high strength, precision made replacement for the stock camshaft inner bearing used on 1936-1999 big twin oem engines. Recommended when installing a cam, this high performance camshaft inner needle bearing for 1936-1999 big twin engines and S&S KN, P,...

This 585CE Chain Drive Easy Start cam is designed to increase performance at an affordable price and Easy Start Cams allow stock starter to start any engine. Because this kit reuses many of the stock parts it is very economical.This Part...

The 585 cam is designed for 88 to 95 inch engines with compression ratios from 10 to 10.5:1 and 100 and 107 inch engines at 9.7:1 to 10.5:1 compression. Many riders are leery of the stock chain cam drive in late model big twins. mt is true that the...

The 570 cam is designed for 88 to 96 inch engines with compression ratios between 9:1 and 10:1. Many riders are leery of the stock chain cam drive in late model big twins. While it is true that the early version introduced in 1999 was not well suited to...